How To Fix Bricked Samsung Galaxy J5/Unroot/Flash Stock ROM (DOWNLOAD)

Want create site? Find Free WordPress Themes and plugins.

Learn How to Flash Stock ROM or How To Fix Bricked Samsung Galaxy J5: You have a Samsung Galaxy J5 and if you are facing any problem like your galaxy J5 is Bricked, stuck at the Samsung Logo, Galaxy J5 gets blank out screen, J5 is not starting or Bootloop problem, also if your J5 is rooted and you want to Unroot your Galaxy J5 or any of problem is happening with your Samsung Galaxy J5 then don’t worry about your Bricked Galaxy J5, here you will get all in one complete solution for your Samsung Galaxy J5, you can fix your J5 by simply Flashing Stock ROM in Samsung Galaxy J5.

 

SamsungGalaxyJ5
Samsung Galaxy J5

    Samsung Galaxy J5

Samsung Galaxy J5 is a average 4G android phone which is available at low cost and its comes with very attracting features like 5.0 inches display, 720 ×1280 resolutions, 5.1 Lollipop Android version, Quad-core 1.2 GHz-A53, 1.5 GB RAM, Dual flash, dual camera- Primary camera- 13 MP and secondary camera- 5 MP, 2600 mah powerful battery. overall its a entire range good phone which is launched in June.2015

Must Read:-

 

    All In One Solution: Flashing Stock ROM In Samsung Galaxy J5

 

You can solve the any of  Problems about your Galaxy J5, By simply Flashing Stock ROM in Samsung Galaxy J5, some of problems I’ve listed below, which you can solve easily by just flashing ROM:

  • If your Samsung Galaxy J5 is not starting
  • If your Samsung Galaxy J5 stucks at blank out screen only
  • If your Samsung Galaxy J5 stucks at Samsung Logo
  • You can Unroot your Samsung Galaxy J5, and again get its warranty officially.
  • If your Samsung Galaxy J5 Stucks at Bootloop.
  • If you don’t have a backup of your Stock ROM and you’ve already installed a custom ROM in your Samsung Galaxy J5, and want to revert it back into your original Stock ROM, just Flash Stock ROM.

According to me flashing ROM in any device is a best trick to comeback android again in its original condition, which make feels you like you’ve purchase your phone after flashing stock ROM. and the best advantage is that if you’ve rooted your phone, then its common you had lost your warranty, and after flashing Stock ROM you can get your phone’s warranty back officially.


Warning: This tutorial is only for Samsung Galaxy J5, don’t try this tutorial for flashing ROM in other android phones. 

Must Read:-

 

    Requirement For Fixing & Flashing Stock ROM In Samsung Galaxy J5


Before going for flashing Stock ROM in Samsung Galaxy J5, you’ve need some requirements, that I’ve Listed below:

  • A PC or Laptop
  • Make sure your phone’s battery is charged at least 50%
  • Enable USB Debugging- Go to your settings> about phone> find Build number and tap it 4-7 times until its show you a message “Now You’ve a Developer Option”. Now go to your settings> developer options> Tick on USB Debugging. (If your phone is not bricked otherwise leave this option)
  • Make a full Backup of all your apps and important data, because flashing ROM can erase everything from your Phone’s memory.
  • Download Odin Flashing Tool From Here- Odin 3.09(this is a zip file, first extract it to use)
  • Download USB Driver for Samsung Galaxy J5 – USB driver  (this is a zip file, first extract it to use)
  • Download Stock ROM for your Samsung Galaxy J5, check your model and download Stock ROM from here I’ve listed below:


Samsung Galaxy J5 {SM-J500F}- Download for your country (Stock ROM)
Samsung Galaxy J5 {SM-J500FN}- Download for your country (Stock ROM)
Samsung Galaxy J5 {SM-J500H}- Download for your country (Stock ROM)
Samsung Galaxy J5 {SM-J500Y}- Download for your country (Stock ROM)
Samsung Galaxy J5{SM-J500M}- Download for your country (Stock ROM)
Samsung Galaxy J5 {SM-J500G}- Download for your country (Stock ROM)
Samsung Galaxy J5 {SM-J5008}- Download for your country (Stock ROM)
Samsung Galaxy J5 {SM-J500N0}- Download for your country (Stock ROM)




Stock firmware for Samsung Galaxy J5 SM-J500F

[[Samsung Galaxy J5-MID J500FXXU1APB4 >> Download (Stock ROM)
Samsung Galaxy J5-THR J500FXXU1APA5 >> Download (Stock ROM)
Samsung Galaxy J5-SLK J500FXXU1AOL3 >> Download (Stock ROM)
Samsung Galaxy J5-INS J500FXXU1AOL3 >> Download (Stock ROM)
Samsung Galaxy J5-INS J500FXXU1AOL3 >> Download (Stock ROM)
Samsung Galaxy J5-ERO J500FXXU1AOL2 >> Download (Stock ROM)
Samsung Galaxy J5-TUR J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-PAK J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-XSG J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-KSA J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-THR J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-MRU J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-MWD J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-TUN J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-MAT J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-XFE J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-MWD J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-MAT J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-AFR J500FXXU1AOL1 >> Download (Stock ROM)
Samsung Galaxy J5-TUN J500FXXU1AOL1 >> Download (Stock ROM)]]

Make sure you’ve check all the above requirements that I’ve listed, all the downloads- Odin, USB Drivers and Firmware(Stock ROM) comes with in a zip format you have to extract all the files before using.
you can extract these files with 7Zip, if you don’t have 7Zip then download it from here.


    How To Fix & Flash Stock ROM In Samsung Galaxy J5

For flashing firmware in Samsung Galaxy J5, check once again the requirements, if you’ve done then go further and follow carefully the given steps:



Step1.
After installing USB Drivers in your PC or Laptop, Reboot your device into Download mode by pressing Home button + Power button + Volume Down key at a same time, press all buttons for 3-4 seconds until its goes to Download mode, and select continue for flashing process:
Downloadmode-galaxyJ5-1
Download mode- samsung galaxy J5

 
Step2.

 Now Open Odin.****.exe and after reboot your device in download mode connect it with your PC with help of a data cable, after connecting Odin will indicate you a message “Added” and ID: COM port on Odin will turn Blue or Yellow depending on Odin’s version, that also means Odin tool is ready for flashing firmware.

 

FlashStockROMViaOdin


Step3.

Now Click on AP or PDA for selecting your firmware that is in .tar or .tar.md5 extension, simply select it and now click on start option on Odin, and leave all settings remain, you have to check only “Auto Reboot” and “F. Reset Time” and leave all settings unchecked, after clicking on start button your flashing process will be start and it takes 5-7 minutes, and when its completed, it will indicate a message PASS on Odin, your device will be automatically Reboot and restart in few minutes, keep patience and do not unplug before its complete, check in below image:

FlashStockROMinSamsung
Step4.

In case, If you got a multi firmware like AP, BL, CP, CSC and .PIT files, then while flashing select all your components one by one and also .PIT file if you have to flash a multi firmware , Check only Re- Partition and F. Reset Time and leave all settings unchecked, now click on start and until your flashing completed. see image in below:
FlashStockROMinGalaxyJ5
Must Read:-

    Fixing Boot loop Problem In Samsung Galaxy J5 After Flashing Firmware

In some cases, your device might stuck in Boot loop problem, to solve this simply reboot your device into recovery mode by pressing Power + Home + Volume UP and do a wipe data/factory reset, and reboot your device, it will start properly and all problems are now solved! congratulations! you’re all done!
Recoverymode-samsunggalaxyJ5
Recovery mode- samsung galaxy J5
 



    Problems In Samsung Galaxy J5 While Flashing Stock ROM Via Odin

I’ve listed some common problems while flashing Stock ROM in Samsung Galaxy J5, so if you are facing any problem, check it double, and try again:
  • If you don’t install Samsung USB Driver properly
  • Duplicate or lose Data Cable
  • Wrong firmware, which means you are not using compatible firmware for your device
  • Check only Auto Reboot and F. Reset Time and leave all boxes unchecked for single firmware, and for multi firmware- check Re- Partition and F. Reset Time and leave all boxes unchecked.

Conclusion

Thanks for reading, the post was about How to flash stock ROM in Samsung galaxy J5 to fix any of problem like Bootloop, blank out screen, or if  you want to Unroot your phone and get warranty officially in your Samsung Galaxy J5. If you are still struggling about your Galaxy J5, then you can ask questions in comment about flashing ROM in Galaxy J5.

Did you find apk for android? You can find new Free Android Games and apps.

6 Comments

  1. Chemutai

Add Comment

0 Shares
Share
+1
Tweet
Share
Stumble