How To Fix Bricked Samsung Galaxy J3 Pro/Unroot/Flash Stock ROM (Download)

Want create site? Find Free WordPress Themes and plugins.
Learn How to Flash Stock ROM in Samsung Galaxy J3 Pro or How to fix bricked Samsung Galaxy J3 Pro. If You have a Samsung Galaxy J3 Pro and if you are facing any problem like your galaxy J3 Pro is Bricked, stuck at the Samsung Logo, Galaxy J3 Pro hanging too much, Galaxy J3 Pro gets blank out screen, J3 Pro is not starting or getting Bootloop problem. Also if your J3 Pro is rooted and you want to Unroot your Galaxy J3 Pro or any of problem is happening with your Samsung Galaxy J3 Pro, Then don’t worry about your Bricked Galaxy J3 Pro. Here you will get all in one complete solution for your Samsung Galaxy J3 Pro and you can easily fix your J3 Pro by simply Flashing Stock ROM in Samsung Galaxy J3 Pro.

SamsungGalaxyJ3Pro-FlashStockROM
Samsung Galaxy J3 Pro

 

    Samsung Galaxy J3 Pro Specification

Samsung Galaxy J3 Pro is entire range smartphone, it comes with very good and attractive features like

Network

  • GSM / CDMA / HSPA / EVDO / LTE

Announced- 2016, June

Body

  • Weight- 139 g (4.90 oz)
  • SIM- Single SIM (Micro-SIM) or Dual SIM (Micro-SIM, dual stand-by)

Display

  • Display Type- Super AMOLED capacitive touchscreen, 16M colors
  • Display Size- 5.0 inches (~68.0% screen-to-body ratio)
  • Resolution- 720 x 1280 pixels (~294 ppi pixel density)
  • Multitouch- Yes

Platform

  • OS- Android OS, v5.1 (Lollipop)
  • CPU- Quad-core 1.2 GHz

Memory

  • Card slot- microSD, up to 128 GB (dedicated slot)
  • Internal- 16 GB, 2 GB RAM

Camera

  • Primary- 8 MP, f/2.2, autofocus, LED flash
  • Features- Geo-tagging, touch focus, face detection, HDR
  • Video- [email protected]
  • Secondary- 5 MP, f/2.2

Sound

  • Alert types- Vibration; MP3, WAV ringtones
  • Loudspeaker- Yes
  • 3.5mm jack- Yes

Battery

  • Removable Li-Ion 2600 mAh battery

 

 

Must Read:-


One Solution (Flash Stock ROM) To Fix Every Single Problem In Fix Bricked Samsung Galaxy J2 Pro(SM-J3110)

You can solve the any of  Problems about your Galaxy J3 Pro, By simply Flashing Stock ROM in Samsung Galaxy J3 Pro, some of problems I’ve listed below, which you can solve easily by just flashing ROM:

  1. If your Samsung GalaxyJ3 Pro is not starting
  2. How to to Unroot Samsung Galaxy J3 Pro
  3. How to Hard reset Samsung Galaxy J3 Pro
  4. How To Fix SoftBricked or unbrick Samsung Galaxy J3 Pro
  5. If your Samsung Galaxy J3 Pro stucks at blank out screen only
  6. If your Samsung Galaxy J3 Pro stucks at Samsung Logo
  7. If Samsung Galaxy J3 Pro hanging and lagging too much
  8. If you’ve deleted any system app or configuration after rooting your galaxy J3 Pro
  9. You can Unroot your Samsung Galaxy J3 Pro, and again get its warranty officially
  10. If your Samsung Galaxy J3 Pro Stucks at Bootloop
  11. If you don’t have a backup of your Stock ROM and you’ve already installed a custom ROM in your Samsung Galaxy J3 Pro, and want to revert it back into your original condition, just Flash Stock ROM.

According to me flashing ROM in any device is a best trick to comeback android again in its original condition, which make feels you like you’ve purchase your phone after flashing stock ROM. and the best advantage is that if you’ve rooted your phone, then its common you had lost your warranty, and after flashing Stock ROM you can get your phone’s warranty back officially.

Warning: This tutorial is only for Samsung Galaxy J3 Pro, don’t try this tutorial for flashing ROM in other android phones.

Must Read:-

Requirements For Flashing Stock ROM In Samsung Galaxy J3 Pro (SM-J3110)

Before going for flashing Stock ROM in Samsung Galaxy J3 Pro, you’ve need some requirements, that I’ve Listed below:

  • A PC or Laptop
  • Make sure your phone’s battery is charged at least 50%
  • Enable USB Debugging– Go to your settings> about phone> find Build number and tap it 4-7 times until its show you a message “Now You’ve a Developer Option”. Now go to your settings> developer options> Tick on USB Debugging. (If your phone is not bricked, otherwise leave this option)
  • Make a full Backup of all your apps and important data, because flashing ROM can erase everything from your Phone’s memory. (If your phone is not bricked, otherwise leave this option)
  • Download Odin Flashing Tool From Here- Odin 3.09 (this is a zip file, first extract it to use)
  • Download USB Driver for Samsung Galaxy J3 Pro – USB driver  (this is a zip file, first extract it to use)
  • Download Stock ROM for your Samsung Galaxy J3 Pro, check your model and download Stock ROM from here I’ve listed below:

Stock Firmware For Samsung Galaxy J3 Pro (SM-J3110)

Download Stock ROM

Make sure you’ve check all the above requirements that I’ve listed, all the downloads- Odin, USB Drivers and Firmware(Stock ROM) comes with in a zip format you have to extract all the files before using. You can extract these files with 7Zip, if you don’t have 7Zip then download it from here.

Must Read:-

How To Flash Stock ROM In Samsung Galaxy J3 Pro

For flashing firmware in Samsung Galaxy J3 Pro, check once again the requirements, if you’ve done then go further and follow carefully the given steps:
Step1.

After installing USB Drivers in your PC or Laptop, Reboot your Samsung Galaxy J3 Pro into Download mode by pressing Home button + Power Button + Volume Down key at a same time for 3-4 seconds until its goes to Download mode, and select continue for flashing process:

 

Downloadmode-SamsungGalaxyJ3Pro
Download mode- Samsung Galaxy J3 Pro

Step2.

Now Open Odin.****.exe and after reboot your device in download mode connect it with your PC with help of a data cable, after connecting Odin will indicate you a message “Added” and ID: COM port on Odin will turn Blue or Yellow depending on Odin’s version, that also means Odin tool is ready for flashing firmware.

 

FlashStockROMInSamsungGalaxyJ3Pro.

Step3.

Now Click on AP or PDA for selecting your firmware that is in .tar or .tar.md5 extension, simply select it and now click on start option on Odin, and leave all settings remain, you have to check only “Auto Reboot” and “F. Reset Time” and leave all settings unchecked, after clicking on start button your flashing process will be start and it takes 5-7 minutes, and when its completed, it will indicate a message PASS on Odin, your device will be automatically Reboot and restart in few minutes, keep patience and do not unplug before its complete, check in below image:

 

FlashStockROMInSamsungGalaxyJ3Pro



Step4.

In case, If you got a multi firmware like AP, BL, CP, CSC and .PIT files, then while flashing select all your components one by one and also .PIT file if you have to flash a multi firmware , Check only Re- Partition and F. Reset Time and leave all settings unchecked, now click on start and until your flashing completed. see image in below:

 

FlashStockROM-SamsungGalaxyJ3Pro



Fixing Boot loop Problem After Flashing Firmware In Samsung Galaxy J3 Pro

In some cases, your device might stuck in Boot loop problem, to solve this simply reboot your device into recovery mode by pressing Power + Home + Volume UP and do a wipe data/factory reset, and reboot your device, it will start properly and all problems are now solved! congratulations! you’ve successfully installed Stock ROM in your Samsung Galaxy J3 Pro.

 

recovery-mode-SamsungGalaxyJ3Pro
recovery-mode-Samsung Galaxy J3 Pro

 

 

Must Read:-

    Problems While Flashing Stock ROM In Samsung Galaxy J3 Pro Via Odin

I’ve listed some common problems while flashing Stock ROM in Samsung Galaxy J3 Pro, so if you are facing any problem, check it double, and try again:

  1. If you don’t install Samsung USB Driver properly
  2. lose or Duplicate Data Cable
  3. Wrong firmware, which means you are not using compatible firmware for your device
  4. Check only Auto Reboot and F. Reset Time and leave all boxes unchecked for single firmware, and for multi firmware- check Re- Partition and F. Reset Time and leave all boxes unchecked.

 

 


[[Note= Sometimes Flashing Stock ROM Might Soft-Brick Your Device, Do At Your Own Risk! I’ll Be Not Responsible For Your Soft-Bricked Android]] 



    Conclusion

Thanks for reading, the post was about How to flash stock ROM in Samsung galaxy J3 Pro to fix any of problem like Bootloop, blank out screen, or if  you want to Unroot your phone and get Warranty officially in your Samsung Galaxy J3 Pro. If you are still struggling about your Galaxy J3 Pro, then you can ask questions in comment about flashing ROM in Galaxy J3 Pro.

Did you find apk for android? You can find new Free Android Games and apps.

2 Comments

  1. Muhammad Naveed Haroon

Add Comment

0 Shares
Share
+1
Tweet
Share
Stumble