How To Fix Bricked Samsung Galaxy J2/Unroot/Flash Stock ROM [DOWNLOAD]

Want create site? Find Free WordPress Themes and plugins.

Learn How to Flash Stock ROM in Samsung Galaxy J2 or How to fix bricked Samsung Galaxy J2: If You have a Samsung Galaxy J2 and if you are facing any problem like your galaxy J2 is Bricked, stuck at the Samsung Logo, Galaxy J2 gets blank out screen, J2 is not starting or Bootloop problem, also if your J2 is rooted and you want to Unroot your Galaxy J2 or any of problem is happening with your Samsung Galaxy J2 then don’t worry about your Bricked Galaxy J2, here you will get all in one complete solution for your Samsung Galaxy J2, you can easily fix your J2 by simply Flashing Stock ROM in Samsung Galaxy J2.

samsunggalaxyj2
Samsung Galaxy J2



    Samsung Galaxy J2

Samsung Galaxy J2 is low range smartphone by Samsung, it is low in cost but its comes with very good and attractive features like 4.7 inches screen size, 540×960 resolutions, 129 g in weight, Os version 5.1.1 (Lollipop), CPU- Quad-core 1.3 GHz Cortex A7, Internal memory- 8 GB, 1 GB RAM, Dual camera>> Primary- 5 MP, Secondary- 2 MP, 2000 mah Battery and much more.



Must Read:-



    All In One Solution: Flashing Stock ROM In Samsung Galaxy J2

You can solve the any of  Problems about your Galaxy J2, By simply Flashing Stock ROM in Samsung Galaxy J2, some of problems I’ve listed below, which you can solve easily by just flashing ROM:-

  • If your Samsung Galaxy J2 is not starting
  • If you want to flash Stock ROM (Firmware) in your Samsung Galaxy J2
  • If your Samsung Galaxy J2 hanging too much
  • If your Samsung Galaxy J2 stucks at blank out screen only
  • If your Samsung Galaxy J2 stucks at Samsung Logo
  • You can Unroot your Samsung Galaxy J2, and again get its warranty officially
  • If your Samsung Galaxy J2 Stucks at Bootloop
  • If you don’t have a backup of your Stock ROM and you’ve already installed a custom ROM in your Samsung Galaxy J2, and want to revert it back into your original condition, just Flash Stock ROM.
  • According to me flashing ROM in any device is a best trick to comeback android again in its original condition, which make feels you like you’ve purchase your phone after flashing stock ROM. and the best advantage is that if you’ve rooted your phone, then its common you had lost your warranty, and after flashing Stock ROM you can get your phone’s warranty back officially.



Warning:- This tutorial is only for Samsung Galaxy J2, don’t try this tutorial for flashing ROM in other android phones.  

Must Read:-

    Requirements For Fix Bricked Samsung Galaxy J2 By Flashing Stock ROM


Before going for flashing Stock ROM in Samsung Galaxy J2, you’ve need some requirements, that I’ve Listed below:

  • A PC or Laptop
  • Make sure your phone’s battery is charged at least 50%
  • Enable USB Debugging– Go to your settings> about phone> find Build number and tap it 4-7 times until its show you a message “Now You’ve a Developer Option”. Now go to your settings> developer options> Check on USB Debugging. (If your phone is not bricked, otherwise leave this option)
  • Make a full Backup of all your apps and important data, because flashing ROM can erase everything from your Phone’s memory. (If your phone is not bricked, otherwise leave this option)
  • Download Odin Flashing Tool From Here- Odin 3.09(this is a zip file, first extract it to use)
  • Download USB Driver for Samsung Galaxy J2 – USB driver  (this is a zip file, first extract it to use)
  • Download Stock ROM for your Samsung Galaxy J2, check your model and download Stock ROM from here I’ve listed below:



SM-J200F

Samsung Galaxy J2 SM-J200F KSA J200FXXU1AOI6 > Download [Stock ROM]
Samsung Galaxy J2 SM-J200F MWD J200FXXU1AOI6 > Download [Stock ROM]
Samsung Galaxy J2 SM-J200F AFR J200FXXU1AOI6 > Download [Stock ROM]
Samsung Galaxy J2 SM-J200F XSG J200FXXU1AOI6 > Download 
[Stock ROM]
Samsung Galaxy J2 SM-J200F TUR J200FXXU1AOI6 > Download [Stock ROM]
Samsung Galaxy J2 SM-J200F MAT J200FXXU1AOI6 > Download 
[Stock ROM]

SM-J200H


Samsung Galaxy J2 SM-J200H SER J200HXXU0AOK1 >>Download [Stock ROM]
Samsung Galaxy J2 SM-J200H SKZ J200HXXU0AOIA >>Download [Stock ROM]
Samsung Galaxy J2 SM-J200H CAC J200HXXU0AOIA >>Download [Stock ROM]
Samsung Galaxy J2 SM-J200H SEK J200HXXU0AOIA >>Download [Stock ROM]
Samsung Galaxy J2 SM-J200H TMC J200HXXU0AOJ3 >>Download [Stock ROM]
Samsung Galaxy J2 SM-J200H WTL J200HXXU0AOJ3 >>Download [Stock ROM]
Samsung Galaxy J2 SM-J200H ECT J200HXXU0AOJ3 >>Download [Stock ROM]

 

SM-J200G

Samsung Galaxy J2 SM-J200G SLK J200GDDU1AOK1 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200G XID J200GDDU1AOK1 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200G INS J200GDDU1AOK1 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200G XID J200GDDU1AOJ4 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200G SLK J200GDDU1AOJ3 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200G INS J200GDDU1AOJ3 >> Download [Stock ROM]



SM-J200M

Samsung Galaxy J2 SM-J200M ZTA J200MUBU1AOK2 >> Download 
[Stock ROM]
Samsung Galaxy J2 SM-J200M TPA J200MUBU1AOK2 >> Download 
[Stock ROM]
Samsung Galaxy J2 SM-J200M TTT J200MUBU1AOK2 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200M COO J200MUBU1AOK2 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200M UFN J200MUBU1AOJ3 >> Download [Stock ROM]
Samsung Galaxy J2 SM-J200M CTI J200MUBU1AOJ3 >> Download
 [Stock ROM]


Make sure you’ve check all the above requirements that I’ve listed, all the downloads- Odin, USB Drivers and Firmware(Stock ROM) comes with in a zip format you have to extract all the files before using. You can extract these files with 7Zip, if you don’t have 7Zip then download it from here.




How To Fix And Flash Stock ROM In Bricked Samsung Galaxy J2 – Step By Step Guide

For flashing firmware in Samsung Galaxy J2, check once again the requirements, if you’ve done then go further and follow carefully the given steps: 

Step1.

After installing USB Drivers in your PC or Laptop, Reboot your Samsung Galaxy J2 into Download mode by pressing Home button + Power Button + Volume Down key at a same time for 3-4 seconds until its goes to Download mode, and select continue for flashing process:

Downloadmode-galaxyJ2-1
Samsung Galaxy J2- Download Mode


Step2.
Now Open Odin.****.exe and after reboot your Samsung Galaxy J2 into download mode connect it with your PC with help of a data cable, after connecting Odin will indicate you a message “Added” and ID: COM port on Odin will turn Blue or Yellow depending on Odin’s version, that also means Odin tool is ready for flashing firmware. 
FlashStockROM-SamsungGalaxyJ2




Must Read:-

 

Step3.
Now Click on AP or PDA for selecting your firmware that is in .tar or .tar.md5 extension, simply select it and now click on start option on Odin, and leave all settings remain, you have to check only “Auto Reboot” and “F. Reset Time” and leave all settings unchecked, after clicking on start button your flashing process will be start and it takes 5-7 minutes, and when its completed, it will indicate a message PASS on Odin, your device will be automatically Reboot and restart in few minutes, keep patience and do not unplug before its complete, check in below image:
FlashStockROMinSamsungGalaxyJ2
How to Flash Stock ROM In Samsung Galaxy J2


Step4.
 
In case, If you got a multi firmware like AP, BL, CP, CSC and .PIT files, then while flashing select all your components one by one and also .PIT file if you have to flash a multi firmware , Check only Re- Partition and F. Reset Time and leave all settings unchecked, now click on start and until your flashing completed. see image in below:
FlashStockROM-SamsungGalaxyJ2-1

 

 

Fixing Bootloop Problem In Samsung Galaxy J2 While Flashing Stock ROM (Firmware)

In some cases, your device might stuck in Boot loop problem, to solve this simply reboot your Samsung Galaxy J2 into recovery mode by pressing Power + Home + Volume UP and do a wipe data/factory reset, and reboot your device, it will start properly and all problems are now solved! congratulations! you’ve successfully installed Stock ROM in your Samsung Galaxy J2

 

SamsungGalaxyJ2-RecoveryMode
Recovery Mode- Samsung Galaxy J2



Problems In Samsung Galaxy J2 While Flashing Stock ROM (Firmware)

I’ve listed some common problems while flashing Stock ROM in Samsung Galaxy J2 so if you are facing any problem, check it double, and try again:
  • If you don’t install Samsung USB Driver properly
  • lose or Duplicate Data Cable
  • Wrong firmware, which means you are not using compatible firmware for your device
  • Check only Auto Reboot and F. Reset Time and leave all boxes unchecked for single firmware, and for multi firmware- check Re- Partition and F. Reset Time and leave all boxes unchecked.

Note:-  Sometimes Flashing Stock ROM Might Soft-Brick Your Device, Do At Your Own Risk! I’ll Be Not Responsible For Your Soft-Bricked Android 

Must Read:-

    Conclusion


Thanks for reading, the post was about How to flash stock ROM in Samsung galaxy J2 to fix any of problem like Bootloop, blank out screen, or if  you want to Unroot your phone and get Warranty officially in your Samsung Galaxy J2. If you are still struggling about your Galaxy J2, then you can ask questions in comment about flashing ROM in Galaxy J2.
Did you find apk for android? You can find new Free Android Games and apps.

20 Comments

  1. Anonymous
  2. Anonymous
    • Adarsh
  3. Ravi
  4. Kusal Thapa

Add Comment

1 Shares
Share1
+1
Tweet
Share
Stumble